How to avoid falling objects when working at heights

You may have great fall protection measures in place to keep employees safe when working at height, but what about their co-workers below? Dropped tools and other falling objects are a major hazard – and one that isn’t always fully addressed.

The following notes will give a clear summary of best practice in securing tools, avoiding tool drops and increasing safety in your workplace.

The problem:

Technicians in the metal working and energy sectors are especially likely to find themselves operating at heights. Think, for instance, of the long climbs involved in maintaining a wind turbine or a tall building. Even a small item of equipment dropped from such a position can seriously injure anyone hit by it. In the United States alone, more than 50,000 people each year suffer injuries due to falling objects, according to OSHA (Occupational Safety and Health Administration).


What the law says:

Who is responsible for your injury? The person who put it there? You – for not being careful? Somebody else? The responsibility is shared.

Every business needs to comply with Health and Safety at Work Act from 2015. It lists step by step guides on how to prevent injuries from taking place. Falling objects are one of those threats that need to be prevented.

People Responsible For Your Safety

Of course, you need to take care of your safety. However, if you are at your workplace, there are others that share that responsibility with you. HSW Act recognises following people as duty holders:

  • PCBU
  • Officer
  • Worker
  • Other persons at workplace

PCBU is the ‘person conducting business or undertaking’. It can be an organisation or an individual and they have the primary duty of care.

This means that they need to make sure the health and safety of the employees are not put at risk at their workplace.Of course, it is their responsibility to ensure this as long as it is reasonably practicable.

The Officer is usually a company director. It is a person who has control or significant influence over the management. Their duty is to make sure that PCBU enforces all the safety measures.

Workers and other persons at a workplace are not without their responsibilities when it comes to health and safety. They need to do take care of themselves and everyone around them when performing their work.

Prevention Steps A PCBU Needs To Take

The main responsibility for the safety of the employees falls upon the PCBU. There are several steps that he needs to take to prevent accidents, including the injuries by falling objects. The first is to eliminate the risk and if that is not possible, then to minimise it.

For example, let us say that you work in a warehouse and there are many heavy boxes stored. Eliminating the risk from one of those boxes falling on you would be – storing them on the ground.

Minimising the risk, on the other hand, can be done in several ways.

  • Substitution – replacing the hazard with something of a lesser risk. In the case of warehouse boxes, it could mean packing stuff in smaller boxes or placing them on lower shelves.
  • Isolation – preventing people from getting in touch with the hazard. In this example, this would mean limiting the access to the areas below the boxes.
  • Engineering control measures – coming up with physical control measures, including processes or mechanical devices. For example, placing strong bars that keep the boxes from falling.
  • Administrative control measures – these are all work processes and procedures that are not managed by engineering or wearing PPE. In this example, it could be introducing all warehouse workers with a guide about how to store and handle boxes safely.
  • Using Personal Protective Equipment (PPE) – the name says it all. In the case of warehouse boxes, it would mean wearing a protective helmet.

When it comes to threat of falling objects, HSW Act requires from your PCBU to try and do the following:

  • Prevent objects from falling
  • If that is impossible, arrest the freefall
  • If even that is impossible, introduce a ‘no-go’ zone

How To Prevent The Objects From Falling?

Nobody can have full control over every little thing that happens at the workplace. Accidents always happen. Gravity will do its thing and some of those tools will fall down from the scaffolds.

Your PCBU should do everything that is reasonably practicable to keep those falling objects from hurting you.

  • All the objects and tools at heights need to be secured, tied down or put away from the edges.
  • Ensuring safe ways of raising and lowering the objects
  • Arresting the fall by providing safety nets, covering pedestrian walks and providing overhead protection

How To Protect People Around You

Some people work at heights and they need to be trained on safety measures. In that way, they will know how to protect their coworkers and themselves. Safety measures include:

  • Keeping everything away from edges
  • Securing tools and materials and fixating them
  • Keeping the work area clean and tidy
  • Using chutes to place debris into the skip area which needs to be below

If you are moving a load from one place to another, make sure that you take care of the following:

  • Secure and balance load before lifting it
  • Take into account the weight and the external factors like wind
  • Make sure that the equipment that you use is fully operational
  • Establish a ‘no-go’ zone while you move the objects

Worst Case Scenario: Someone Got Hurt

Even if everybody is being very careful, somebody might get hurt. In that case, you need to have your First Aid Kit ready. Moreover, it needs to be compliant to all the legal requirements.

Your First Aid Kit needs to be positioned near the places where is more likely for accidents to occur. If your workplace includes some potential risks, there should be a trained first aider among your employees.

Having a proper First Aid Kit that is always up to date and fully stocked is somewhat challenging. Replacing the items from it can slip your mind. However, if a falling object hurts somebody, you need to know that your Kit contains all you need for dressing that wound. Reference: Alsco.co.nz

Six step to prevent injuries from falling objects

  1. Provide Warning. When working on a jobsite where the potential for falling objects exist the employer needs to provide adequate warning for both the employee and other people who may enter the jobsite. ...
  2. Secure loads. ...
  3. Properly move load. ...
  4. Keep a clean worksite. ...
  5. Administrative controls. ...
  6. Protective Equipment.

Ash Air is here for your  longevity!

Your business performance is what we strive for. We operate in the safest way possible while we offer a full range of Chicago Pneumatic and Alup air compressors, tools and on-site solutions. We also provide oil-free compressors and food-grade oil to suit your needs. Ash Air are specialists in vacuum pumps, blowers, and medical gas solutions. Ash Air offers complete quality air solutions as well as advanced piping systems for the performance and efficiency of your compressed air system.



Do you have an idea for our #expertcorner? Let us know!

Useful links:

Book Your Compressor Service

Who we are and how Ash Air can help your business!

Ash Air has been around in New Zealand since 1979, and we’ve grown into a nationwide company with international support and a reputation for quality and reliability.We look after all things compressed air for your business!

  • Reciprocating, Screw, air compressors
  • Vacuum pumps
  • Nitrogen
  • An extensive line of air treatment components

Ash Air's range of Chicago Pneumatic, Alup, Pneumatech, and Quincy compressors are used extensively around the world in industries ranging from oil and gas to food, automotive and farming, and we bring you these world class compressors here in the land of the long white cloud.Our technicians are compressed air equipment experts and are dedicated to addressing customer needs. Supported by a 13 locations nationwide, Ash Air offers one of the widest selections of compressed air equipment and parts available today in New Zealand.

Reliability and Efficiency

With Ash Air compressors, you can count on reliability and high performance for even the most demanding applications. We focus our efforts on the following:

  • Increasing uptime
  • Reducing unexpected repairs
  • Reducing energy consumption
  • Improving the cleanliness of compressed air


Talk to the team today:  CONTACT US CONTACT US

Read more from our #expertcorner


Air compressor leaks can be a substantial source of wasted energy in any system, sometimes wasting 20-30% of a compressor's production. Worst of all, a poorly maintained compressor can have a leak rate expected to equal 20% of total compressed air... …


Choosing the right compressor is essential to your long-term satisfaction and maybe, to the profitability of your business. Many times compressors are based on a single factor alone, such as horsepower or tank size, which is only part of the story. …


In oil injected screw compressors, there is a thin layer of oil found between the rotors to create a seal and maintain proper efficiency as the compression occurs. The unfortunate side effect of this solution is that oil may carry over to the point of use in your air system. This can be mitigated by having correct filtration in place to remove the oil contaminants in your air. Additionally, many individuals may decide to opt for a completely oil-free solution, with the use of a scroll compressor or water injected screw compressor. …


Most businesses concentrate on the air compressor and consider the piping as a secondary concern. The piping system can make or break your business. Faulty, inefficient piping can cause pressure loss and lost power. Keeping a close eye on the overall layout, installations and maintenance of your air piping system will help keep your business running at its’ optimal efficiency. …


Our #1 Focus is Customer Service! Whether you have questions about which compressor is right for you, or if you’re ready to improve your operations and start saving on expenses. Ash Air has been around for over 40 years because we offer reliable and hardworking air compressors, vacuum pumps, and services as well as expert advice and support. …


An oil analysis can prevent problems later down the road. It's often been referred to as the blood test for your compressor. Just like a blood test can tell you about your health and early alerts to impending problems, an analysis can do the same for your compressor. …




Did you know that pressure drops and leaks are the two largest areas of energy loss on your air compressors? It’s easy to understand why a leaking pipe or fitting creates energy loss. Pressure drops are not quite as noticeable, since you cannot hear ... …


Whenever anything doesn't work properly, it's frustrating and we get it. If this is your first time experiencing troubles with your dryer, you're probably unsure where to even start. Getting your dryer repaired and back up and working is critical to ... …


Screw compressors are helpful for an enormous range of applications such as air filling, packaging, tools, HVAC control, and more! One possible drawback is the amount of electricity they use; air compressors can be a huge drain on energy if used ​ine... …



Most air compressors require constant oil lubrication to prevent friction on the pistons or screws and other moving parts. To make sure your air compressor is running efficiently, it is important to check your oil level regularly and to know how much... …


Have you heard of the term "Total Air Solutions"? A total air solution means everything that goes with the compressor for your business’s air system. 90% of companies require more than just an air compressor.  …


When speaking of air compressors, compressed air treatment is a process that dehumidifies and cleans air before entering the compressor. Most commonly, this process involves air filters and an air dryer. …


Air compressors are used in many different applications and provide essential compressed air to many businesses and individuals with different air needs. No matter what your CFM, PSI and HP requirements are, the electronic controller on your air compressor is the motherboard for keeping your unit running as efficiently as possible. It is your eyes into your machine. …


Air compressors are helpful for an enormous range of applications such as air filling, packaging, tools, HVAC control, and more! One possible drawback is the amount of electricity they use; air compressors can be a huge drain on energy if used ​inefficiently​. If you are running them too long, allowing leaks to exist, or using the wrong type of compressor, you are wasting ​energy and money​. This article will go over some of the biggest power-wasters and how to
stop/prevent them! …



In the following guide, we want to try to answer some of the questions you may have been asking yourself in regards to screw air compressors. If you do not find the answer you are looking for, please get in touch with us. …


Compressed air is a key utility supporting the food packaging and food processing industries. It is used in machines that fill products such as cakes, pies, and liquid products, as well as during the packaging and transportation of snacks, vegetables, beer, soda and other items.. Compressed air must be moisture and contaminant-free to ensure the protection of the food products processed in each facility.  …


Minimizing the risk of accidents in the workplace is a top priority in industry, and it is especially important when working with pneumatic power tools. Ensuring that all safety precautions have been taken to protect the health and wellbeing of operators is vital. With this in mind, here are seven simple steps to reduce the risk of accidents and improve operator safety …


Regardless of the type of compressor you have, vibration issues can be troubling for any business. The root of the vibration can stem from multiple sources, some internally and others externally. Understanding the cause of the vibration and how to resolve them will be critical in keeping your compressor in proper working order. …


Air compressors are essential to your business, but they can also become a safety hazard when used improperly. Reading your owner’s manual and following all proper safety precautions before use is vital in keeping your compressor in great, working condition. …


Corrosion in the pipeline is due to insufficient condensation drainage that occurs during compression. The resulting condensate, together with the compressed air, flow further into the compressed air line network and has a negative effect on the pipes. Find out more about how you can prevent corrosion here. …


FRLs – Filters, Regulators and Lubricators – guarantee the efficiency and durability of pneumatic tools. Including an FRL in your air system is vital to running an efficient air line set-up and key to achieving a good return on investment. Read more here! …


Check out this blog and video included to help you know what you should be looking for when you're thinking about purchasing a Chicago Pneumatic Rotary Screw Compressor for your shop or application. If you want to learn about what a screw compressor actually is, check out this article   …


There are 3 simple steps to make sure your air line installation is providing the right pressure and that your accessories selection is correct, so you can ultimately work productively. It does not take long and it is something you can easily do yourself using our self-diagnostic checklist.  …


Okay, okay, we're a bit excited. With the recent launch of our air tools in our online shop. Here's a 101 for you about what air tools you might need in your air compressor tool kit. Air tools are prevalent in automotive industries, woodworking, construction, metalwork and more. Did you know that there's pretty much an air-powered version nearly any power tool on the market? We want to share with you our 'Must have Air Tools'. …


When you are thinking about an air compressor, you might be have the image of the super popular piston or reciprocating compressor in your mind. The compressor that you see in home workshops, automotive garages pumping up tyres and assisting in spray painting cars. …


As a follow on to our Why You Should Not Use PVC Piping for Your Compressed Air System blog, we share with you what piping you shouldbe using to get the most out of your compressed air system. Here at Ash Air we have the perfect solution if you're wanting to match your great compressor with a fast, easy and reliable piping solution that supports the operational excellence of your whole compressed air system.  …


An air compressor is a big purchase for any business. It is visibly important to properly maintain the air compressor and filter elements to protect that investment. Air intake filters are installed in an air compressor to remove any dust or debris the compress may suck in. Dust will cause wear to the compressor element, valves, filters, compressor oil and any moving parts. …


So you have a vacuum pump installed and you rely on it for your business operations and performance? Here are some reasons why you should consider overhauling your vacuum pump! s with all machinery and compressed air equipment, regular maintenance can help ensure optimised safer performance of your vacuum pump. Learn more about benefits of restoring, rebuilding and repairing your vacuum pump. …


Air compressors are used every day, by many industries around the world. They are often considered the heart of a business, in that most companies will rely on their performance and efficiency to run their operations, to get work done effectively and safely. In your day to day, you've probably seen air compressors in use - whether at a build site powering construction equipment or in a mechanics workshop inflating tyres. …


A scroll air compressor, or spiral compressor, compresses air by drawing it it, trapping it, reducing the volume and discharging it at the outlet port. The scroll compressor that you see today, such as SpiralAIR, have been the result of modernised advancements in manufacturing technology, even thought the concept of a scroll compressor has been around for over 100 years.The scroll compressor is oil-free orbiting, or positive displacement compressor. The compressor has a stator spiral fixed in a housing, and a motor driven eccentric orbiting spiral.  …

Show More


Quick Links
Get in touch

0800 808 486

  help@ashair.co.nz

  Nationwide coverage, all regions



Keep up to date with news, promotions and more

Full URL


© 2026 Ash Air • Website design by Fuel