5 Warning Signs Your Air Compressor Needs Remote Monitoring



Compressed air systems are often described as the "fourth utility" because they are essential to daily operations across manufacturing, food processing, pharmaceuticals, automotive, and many other industries. Yet many facilities still rely on manual inspections or reactive maintenance to monitor compressor performance. As production demands increase and maintenance resources become more limited, this approach exposes businesses to unnecessary operational risk. Modern remote monitoring platforms provide continuous visibility into compressor performance, enabling maintenance teams to identify developing issues before they result in costly failures. If your compressed air system exhibits any of the following warning signs, it may be time to consider a remote monitoring solution such as Ash Air ICONS.


1. Your Compressor Experiences Unexpected Shutdowns

Unexpected shutdowns are one of the clearest indicators that equipment health is not being monitored effectively. Most compressor failures don't occur without warning. In many cases, equipment provides early signs of deterioration days or even weeks before a shutdown, including:

Without continuous monitoring, these warning signs are often missed because manual inspections provide only a snapshot of equipment condition.

2. Your Energy Bills Continue to Increase

Many businesses assume rising electricity costs are simply due to increasing production or energy prices. However, compressed air systems are frequently one of the largest consumers of electricity within an industrial facility. Energy typically represents 70–80% of the total lifecycle cost of an air compressor.

Common causes of excessive energy consumption include:

These inefficiencies often develop gradually and remain unnoticed until utility costs become significant.

3. Maintenance Is Always Reactive

If maintenance activities begin only after equipment fails, the organisation is operating in a reactive maintenance environment.
Reactive maintenance often leads to:

A more effective approach combines scheduled servicing with continuous condition monitoring.

4. You Manage Multiple Compressors or Multiple Sites

As organisations expand, maintaining visibility across multiple compressors becomes increasingly challenging.
Maintenance personnel often rely on:

This approach makes it difficult to compare equipment performance across different locations or prioritise maintenance activities.

5. You Have Limited Visibility Outside Normal Operating Hours

Many compressed air failures occur overnight, during weekends or outside normal business hours. Without remote monitoring, problems may remain undetected until operators return to site, potentially resulting in:

Moving From Reactive Maintenance to Proactive Maintenance

Remote monitoring is more than simply viewing compressor data online.
It enables organisations to shift from reactive maintenance towards predictive maintenance by:

Detecting performance changes early

Identifying recurring alarm trends

Tracking operating conditions

Supporting data-driven maintenance decisions


Improving equipment reliability

Most compressor failures don't happen suddenly—they develop gradually through small changes in operating conditions. By identifying these warning signs early, businesses can avoid costly downtime and improve the long-term performance of their compressed air systems. Remote monitoring provides the visibility needed to make informed maintenance decisions, helping organisations maximise reliability while reducing operating costs.


Ready to improve the reliability of your compressed air system?

Contact the Ash Air team today to learn how ICONS can help you monitor, analyse and optimise your compressor performance.

Contact Us Contact Us

Read more from our #expertcorner


In our connected and changing world it’s essential to keep learning and upskilling ourselves. We have a culture that actively promotes continuous learning, for the good of everyone's professional and personal development.  …


The health and well-being of our people are vital to us, which is why we set very ambitious standards for workplace safety. We promote a healthy and active lifestyle and encourage a healthy work-life balance. Coming into winter, its more important than ever to make sure our team are feeling well!  …



At Ash Air, we are committed to being part of the solution for a better tomorrow with our compressed air solutions. An integrated sustainability strategy, backed by ambitious goals, helps us deliver greater value to all stakeholders in a way that is economically, environmentally, and socially responsible. Learn more about our sustainability framework! …


Compressed air system leaks are indeed a big source of energy waste. Leakage in piping systems have been shown to exhibit leaks of up to 25 percent of the total energy costs. Addressing leaks is one of the first maintenance steps a facility can take to reduce energy costs. …


Ash Air are pleased to announce our offering of Atlas Copco range of vacuum solutions and products for all industrial applications. This portfolio of intelligent and connected vacuum pumps serve a broad range of industrial applications. The Atlas Copco vacuum pump ranges from the intelligent and energy saving Variable Speed Drive Series of oil-sealed, dry and liquid ring pumps to the traditionally reliable vane and claw pumps. Whether you need a dedicated point-of-use pump, a clean Class 0 certified pump or a centralized vacuum system, we have a vacuum solution for every industrial application. …


Safety, Health, and Wellbeing Day is a day that reminds us to prioritize safety and health not only in the workplace, but also for our customers. It’s day for us to reflect on our commitment to maintaining a safe and healthy work environment for everyone... Read more about how Ash Air implements safety in the workplace here. …


If you have a vacuum system, you need a helium leak detector. You spend a lot of money on vacuum pumps, piping, hardware, and gauges, but if you have a leak, your system ends up not working effectively and you're throwing away money. Leak detection is an important step that you should not skip during your vacuum system application. …


Think about efficiency for a minute. Every year with constant innovation, things are becoming even more efficient. Everything from electronics to industrial machinery are being developed to get more done faster while using less power. …


The air surrounding us is a mixture of fry air and water vapor. The amount of water in the air depends on the temperature and volume of the gas. The higher the air temperature, the higher the air's ability to absorb more moisture. Find out about compressed air humidity here. …


Investing in an on-site industrial gas generator is a great way to reduce your environmental footprint and your operating costs. Once you have taken this important step, there are some other things you can do to maximize your gas generation energy savings. Here are seven of them. …


For many businesses, preserving energy and becoming more sustainable have become top priorities. That not only saves them money but also makes them more competitive in the future, when demand for “green” products and services will only increase. Not just because governments mandate greater sustainability but also because customers expect it. …


Here at Ash Air, we are proud to be opportunity employer. Infact, we have 30% female representation across the entire company. For a male dominated industry, we're very proud of this. Ash Air has representation in our National Warehouse, Branches and Head Office locations with administrators, accounts, schedulers, sales and service engineers, and managers roles throughout the country. …


While you relax and read this, do you see an electronic appliance around you? Wondering how could you relate to the current read? We got you! Compressed air is all around, in the electronic appliances you use right now. …


There are many contaminants that can threaten your compressed air system, but moisture is among the most prevalent. You may be thinking, but it’s just water, but water can have a devastating impact on your compressed air system, your production equipment, and your end product. The best way to prevent moisture from contaminating your compressed air is with a dryer. …


Compressed air can be one of the most expensive forms of energy for manufacturing plants, often using more energy than other equipment. One horsepower of compressed air requires eight horsepower of electricity. With many air compressors running at efficiencies as low as 10%, there’s often plenty of room for improvement. Fortunately, 50% of compressed air systems at small- to medium-sized industrial facilities have opportunities for low-cost energy conservation. …


As easy as it would make all of our lives, vacuum pumps are far from being “one size fits all”. Not only do you have the size to consider when choosing a vacuum pump, but more importantly type. I will briefly touch on some of the advantages and disadvantages associated with each vacuum technology we deal with. This should give you a better understanding of where to begin your search... …


Ash Air is proud to share that we have achieved the SiteWise Gold Certificate award.

This means that we have demonstrated that we have high quality health and safety systems in place. Well done to our team and dedicated SHEQ Manager on their commitment to Health and Safety. …


AIRnet offers moisture-eliminating drop fittings called Quick Drops! Quick Drops make “drop-tees” obsolete, removing the need for extra parts and pipe, while saving time and money. …


Proper compressor installation and commissioning helps ensure trouble-free startup and long-term reliability. Thorough inspection and critical review during each phase of the installation process eliminates “built-in” deficiencies or problems which c... …


Price is an important consideration when choosing a tool for metalworking applications, but it alone should not be the deciding factor. Other things also contribute to the total cost of ownership, performance, and, ultimately, the overall productivit... …


And just like that, 2022 is coming to a close. And what a year it has been!  We would like to take the opportunity to thank you for your ongoing support throughout 2022. We look forward to continuing to supply you with our industry-leading products and trusted services now and in the future. Wishing you and your team a safe and happy holiday season. …


Are you faced with the decision of whether to switch from purchasing bottled nitrogen or oxygen to on site gas generation? In that case, the decision is easy. You should! Lower costs, the right purity, less transportation emissions, improved safety, no logistics headaches. In all of these areas, on site gas generation is the superior solution. And making the switch is easy. All you need is a gas generator and a supply of compressed air. …


This week on 15th - 17th November, we held the Ash Air Sales event. It was a fantastic opportunity for our sales team to come together, collaborate and take away new learnings and best practices.  …


Did you know that one of the largest costs for industrial manufacturers is compressed air? That’s right – anywhere from 12% to 40% of a facility’s total energy costs come from its compressed air installation. This means that finding innovative ways (no matter how small) to increase compressed air efficiency can amount to big savings over the long run! Items like leak elimination, air audits, reduced pressure bands, and reducing unloaded running hours are some of the most popular ways to decrease energy usage – but there are many other actions that you can take. Read on to discover additional ways to reduce your costs and make sure your compressor system is running as efficiently as possible! …


A properly sized and designed piping system is a necessary component of any distribution compressed air system. Without this key component in place, the delivery of air from the compressor to the specific points of use will be inefficient and costly, both in the short term as well as in the long term. Let’s look more closely at how to size your compressed air piping system to ensure minimal pressure loss while maintaining maximum efficiency. …


Potential for growth of micro-organisms in a compressed air system is tied to the moisture level (dew point) of the compressed air. In simple terms, if there is moisture in your compressed air, microorganisms such as mold and bacteria have the environment they need to grow and thrive. While it’s true that as air is compressed, much of the moisture present in the intake air will condense, enough moisture remains to allow micro-organisms to proliferate. …


Your compressor installation is a workhorse that requires regular service and maintenance to help it achieve maximum efficiency and longevity. This is where compressor monitoring and data gathering technologies come in, as these provide meaningful information on your system that can be visualized, tracked over extended time periods, and used to make insightful decisions regarding compressor performance.  …


As a provider of market-leading, industrial compressors across New Zealand, we recognised the need to have a software system that eliminated time-consuming paperwork, provided clear oversight and helped our staff become more time-efficient. As well as being environmentally and climate conscious! …


We believe that diversity and inclusion are business-critical drivers for our long-term success. Here we chat to one of our diversity ambassadors, Natalie, and what a work week looks like for her. …


Here at Ash Air, we are passionate about understanding our customers and we have helped them save costs on their compressed air and vacuum systems.Today Ash Air is trusted by more than 5,500 businesses, large and small, all over New Zealand.Learn what our customers have to say about us in this article. …


In our connected and changing world it’s essential to keep learning and upskilling ourselves. We have a culture that actively promotes continuous learning. Here at Ash Air, we focus on face to face hands-on trainings with our services engineers, and national sales conferences that bring our team from all corners of the country together to support their continuous competence development. …


A variable speed compressor is not for every application. VSD rotary screw compressors need to be ran in a location that is in need of 24/7 compressed air and has a changing demand on the amount of air needed. If your compressed air needs are constan... …


Compressed air purification equipment must have a very low pressure drop, long service life and be strong enough to withstand the most strenuous operating conditions. Protection from oil slugs or compressor air/oil separator failure is essential. …


Congratulations to the new owner of a #chicagopneumatic 2.5HP #aircompressor, from South Auckland. Erikk from Ultra Laser Cutting was thrilled to have walked away with a brand new compressor for his workshop after visiting us at the EMEX 2022 trade show and scanning his details with our team for more information. …


Intelligent Connectivity System (ICONS) is the eyes into your compressed air system. Ditch the logbooks, the regular visits to the compressor room and dealing with surprises with your compressor. • Most maintenance organizations operate between 10% to 40% efficiency • Most spend more than 50% of time on emergency work • Reactive maintenance costs 3-5 times more than preventive maintenance. …


Compressed air is used in many different industries. From refrigerator manufacturers to toy makers, companies around the world depend on compressed air to produce products. It's so important that many consider it a utility as significant as electricity, water or natural gas. …

Show More
Quick Links
Get in touch

0800 808 486

  help@ashair.co.nz

  Nationwide coverage, all regions



Keep up to date with news, promotions and more

Full URL


© 2026 Ash Air • Website design by Fuel