How can I maximise the performance of my compressor?

Air Compressor Maintenance is Key

Maintenance is a key factor to continue the performance of your air compressor. You can also check the environment of your compressor to make sure it is good and clean. It is important that the environment does not get too hot and confines spaces have ventilation. In some cases, HVAC must be ducted into the mechanical room, where the compressor is sitting. This will ensure that the compressor does not overheat.

Filters and coolers are to be kept clean. It is important to check the air compressor regularly, following the instruction manual. Stay on top of it all from draining the moisture to servicing the machine accordingly and you will be rewarded with a efficient and reliable compressor. Anything that is neglected on the air compressor could end up requiring more maintenance in the future, so keep regular maintenance intervals and follow some key maintenance tips.

Normal wear and tear can result in lower machine efficiency. Preventive maintenance guarantees optimal working conditions and preserves the life span of the equipment. A planned preventive maintenance may cause small hindrance for production, but that is nothing compared to actual downtime caused by a breakdown.

Below is a list of common maintenance tips based on the typical intervals we see for these services. Not all may apply to your compressor type, and your service intervals may be more or less frequent.

• Air Filter– Change the air filter every 1000 hours or as needed. Check weekly and clean to eliminate any dirt and fragments.
• Oil Filter – Change every 1000 hours or as desired.
• Lubricant – Check level daily. Change every 4000 to 8000 hours (depending on type) or as required. We recommend synthetic oil.
• Separator Element – Change out when the lubricant is changed.
• Belts – Check weekly for wear and tension. Adjust tension and replace belts as needed.
• Motor Bearings – Grease every 2000 hours or as needed.
• Intake Vents – Check weekly and clean as needed.

It is important to get the right size compressor for your application. If the compressor is under-sized, it will run more, and the demand will be harder on the equipment. Get the right piece of equipment from the start by giving us a call on 0800 274 247  talk about your compressor needs or contact us

Do you have an idea for our #expertcornerLet us know!

Who we are and how Ash Air can help your business!

Ash Air has been around in New Zealand since 1979, and we’ve grown into a nationwide company with international support and a reputation for quality and reliability.We look after all things compressed air for your business!

  • Reciprocating, Screw, air compressors
  • Vacuum pumps
  • Nitrogen
  • An extensive line of air treatment components

Ash Air's range of Chicago Pneumatic, Alup, Pneumatech, and Quincy compressors are used extensively around the world in industries ranging from oil and gas to food, automotive and farming, and we bring you these world class compressors here in the land of the long white cloud.Our technicians are compressed air equipment experts and are dedicated to addressing customer needs. Supported by a 13 locations nationwide, Ash Air offers one of the widest selections of compressed air equipment and parts available today in New Zealand.

Reliability and Efficiency

With Ash Air compressors, you can count on reliability and high performance for even the most demanding applications. We focus our efforts on the following:

  • Increasing uptime
  • Reducing unexpected repairs
  • Reducing energy consumption
  • Improving the cleanliness of compressed air

Talk to the team today:  CONTACT US CONTACT US

Read more from our #expertcorner

Air compressors are used in many different applications and provide essential compressed air to many businesses and individuals with different air needs. No matter what your CFM, PSI and HP requirements are, the electronic controller on your air compressor is the motherboard for keeping your unit running as efficiently as possible. It is your eyes into your machine.

The emergency stop, "e-stop", is for true emergency situations only. When hitting the e-stop, all power is halted from the machine and the unload process isn't achieved. The emergency stop button is intended to help with possibly hazardous situations that are developing. Common conditions of having to use the e-stop is the misuse of the equipment in ways that weren’t intended, predictable failures not addressed or failing to consider all the foreseeable uses of the compressor.

Air compressors are helpful for an enormous range of applications such as air filling, packaging, tools, HVAC control, and more! One possible drawback is the amount of electricity they use; air compressors can be a huge drain on energy if used ​inefficiently​. If you are running them too long, allowing leaks to exist, or using the wrong type of compressor, you are wasting ​energy and money​. This article will go over some of the biggest power-wasters and how to
stop/prevent them!

In the following guide, we want to try to answer some of the questions you may have been asking yourself in regards to screw air compressors. If you do not find the answer you are looking for, please get in touch with us.

Show More

All brands. 24/7 nationwide support.

Here at Ash Air, we offer second-to-none service and deliver sustainable solutions that increase customer productivity. Ash Air has been maintaining New Zealand's compressed air and vacuum systems for more than 40 years

Keep up to date with News,
Promotions and more