.png)
Do you regularly consume nitrogen in your company? If so you are more than aware of what an ordeal nitrogen tank rental and delivery can be.
The rental and delivery service is very expensive, replacing tanks regularly causes unnecessary downtime and added labour costs, the gas
companyβs contracts can be hard to get out of. The bulky nitrogen cylinders take up a lot of floor space in your facility, having
vessels of gas under high pressure, is an ever-present health and safety risk. β¦ and the list goes on. Did
you know that you can start saving money by generating your own nitrogen?
Nitrogen is part of our air and can be produced easily and inexpensively using the compressor that is already available in your company
and is therefore always available. You avoid costs for cumbersome logistics, minimize the risks of handling gas cylinders, are no
longer dependent on external suppliers and no longer require storage space. In addition, around 10% of the gas usually remains in the
cylinder and cannot be used. You save up to half the cost! So avoid the bottleneck in your nitrogen supply and make the switch
today!
Switch and save today and stop relying on third party suppliers! We offer a range of generators that allow you to produce
nitrogen at your own facility to whatever purity level your application requires! On-site nitrogen allows you to reduce the waste, control
the purity, and have nitrogen gas available at your fingertips 24/7. Our nitrogen generators are available in
both PSA and membrane technologies.
With all this in mind, why stick with bottled N2?
Not only does a nitrogen atmosphere limit the shelf life of the valuable raw ingredient (hops) in storage, the use of nitrogen across the brewing process extends the shelf life of the final product.
Capital investment in onsite nitrogen generators are recovered quickly, given that nitrogen is cheaper to generate compared to traditional third-party gas supply, which also requires several hours of order co-ordination and runs up carbon costs through transportation.
While high-pressure cylinders present a safety risk and must be subject to rigorous protocols, onsite nitrogen
generators are far safer and subject to the same protocol as air compressors.
Co-ordinating supply and deliveries of nitrogen supply takes time. Onsite nitrogen generation ensures nitrogen availability on demand.
When using third-party nitrogen tanks, unused nitrogen is usually βblown offβ to prevent the risk of explosions. This results in gas wastage. With onsite gas generation, nitrogen is produced only as required.
You are looking for a complete nitrogen solution including a compressed air station? Talk to us, we can provide you
with a complete offer including a compressor and all components to ensure a flawless installation
120 Years of Chicago Pneumatic
Celebrating 120 years of passion for performance
At Chicago Pneumatic we share a legacy of passion for performance and long-lasting partnerships. In 2021, we are proudly celebrating 120
years and we are as committed as ever to offering innovative, reliable products and service based on technology and trust.
Read More…
© 2026 Ash Air β’ Website design by Fuel
