Our Medical Vacuum Plant is intended to provide a continuous supply of medical vacuum to a medical gas
pipeline system in healthcare facilities.
Additional safety protections assure vacuum demand for hospitals even in cases of single fault conditions
Modular and packaged solutions Pneumatech MGS Medical Vacuum Systems are intended to provide a continuous supply of medical vacuum to a pipeline system in healthcare facilities. The centralised medical vacuum system is available with two to six vacuum pumps. The vacuum plant can be configured as a packaged or modular system. The vacuum pumps are air-cooled with no water requirements. Each vacuum pump is an oil flooded, rotary vane type which draws air into the receiver vessel via the filter assemblies.
As part of the standards requirements, condensation traps and flexible links are fitted to each exhaust which helps protect the pump. The control circuitry and power management system completely monitor the safe operation of the vacuum plant, by signalling into the alarm system, which meets the requirements of HTM 02-01, HTM 2022 and ISO 7396-1.
The controller helps protect the medical vacuum system and offers the possibility to repeat important alarms through a set of voltage-free contacts. It can connect to a hospital facility’s Building Management System (BMS). The filter assemblies are duplexed to allow the plant to remain in service during filter element replacement. In addition, in-house developed bacterial filter assemblies with a 99.9999% efficiency are included. The assemblies are mounted to a robust steel frame which is easy to install and manoeuvre on site
Place your content here.
The PMGS medical vacuum system is supplied with the Purelogic™ Central Controller which sequences and controls the vacuum pumps. Real-time status can be viewed on any computer connected to the hospital’s LAN network as standard.
High efficiency pumps Oil-lubricated rotary vane vacuum pumps offer high flow performance. Pumps are mounted on anti-vibration mounts to provide quiet operation. Composite vanes provide long life-time (up to ten years under normal operation) and low noise level.Â
Vessel-mounted systems are complete stand-alone assemblies with pumps and filters mounted on a single horizontal vacuum vessel. This configuration provides a compact, low-footprint unit specifically designed for ease of installation. Models up to 1000 litres (HTM 2022) and 500 litres (HTM 02-01) are supplied in this format as standard.
Easy to install
Supplied pre-piped, with all required cables and instructions to do fast and simple on-site assembly.
Our plants can be configured as a packaged or modular system, with two to six medical vacuum pumps.
Supplied with the Purelogicâ„¢ Central Controller that sequences and controls the vacuum pumps.
The filter assemblies are duplexed to allow the plant to remain in service during filter element replacement. In addition, bacterial filter assemblies with a 99.9999% efficiency are included.
User friendly, colour and graphical display
Plae your content here
© 2024 Ash Air • Website design by Fuel
