[ { "product_id": "320", "product_title": "Pneumatech PH 700 - 2950 HE Welded Vessel Heatless Adsorption Dryers | 1188-5040 m3\/hr", "product_content": "## Pneumatech PH 700 - 2950 HE Welded Vessel Heatless Adsorption Dryers | 1188-5040 m3\/hr PH heatless adsorption dryers use dry, expanded purge air to remove moisture from the desiccant material. Incorporating high-quality components, PH heatless adsorption dryers provide you with clean, dry air to extend the life of your equipment and products. Heatless adsorption dryers use dry, expanded purge air to remove moisture from the desiccant material. Incorporating high-quality components, PH heatless adsorption dryers provide you with clean, dry air to extend the life of your equipment and products. Heatless adsorption dryers use dry, expanded purge air to remove moisture from the desiccant material. The unique manifold (patent pending) includes pilot air controlled 3\/2-way valves, which switch fast and reliably. The pressure drop over the valves is reduced to a minimum. This does not only result in a low pressure drop over the dryer, but also ensures maximum purge air expansion during regeneration. The latter makes that the purge consumption of the dryers has been reduced significantly. The desiccant is spring-loaded and housed in a robust extruded aluminum body, which can operate up to 14 barg\/203 psig (fatigue load). The dryers are equipped with a mounted pre-filter and after-filter as standard and can also be wall-mounted with a specially designed wall-mounting kit (optional). Operating costs are optimized at all times thanks to the availability of compressor synchronization and purge nozzle optimization as standard and PDP control as option. The full machine status can be checked on the display of the controller and the vessel pressure gauges on the unit. The controller indicates whether power supply is connected, towers are pressurized, valves are functioning properly or preventive maintenance needs to be done. In case the optional PDP control is connected, the PDP value can monitored from the display. Alarms and warnings can also be triggered remote with the available voltage-free contacts. Optionally the PurelogicTM can be used as central brain of the adsorption dryer ## What makes PH blower purge desiccant dryers unique? Purelogic™ advanced control with remote start\/stop and web monitoring standard on all modelsQuality butterfly and check valves with SST discsLow kW centrifugal blower with safety alarmTower switching based on real-time dew pointGalvanized piping with flanged connections ## Control and Monitor Your Dryer The Purelogic™ is the ideal complement to your desiccant dryer. This state-of-the-art control solution will provide optimal control and monitoring of your machines, increased reliability and reduced energy use. Purelogic™ is standard on PE and PB dryers, and is optional on the PH range.• Easy to use – Purelogic™ incorporates a 3.5” high-definition color display with a multilingual user interface, clear icon indications and Ethernet connectivity.• Control & monitoring – Purelogic™ displays & controls all parameters to ensure reliable operation of your desiccant dryer.• Reliable – Heatless backup mode (PE\/PB) and choice for auto restart after power failure.• Safeguards production – Offers a number of alarms that gives the customer the information needed for safe operations # Features ### Advanced energy management for lowest operating costs Compressor synchronisation Purge nozzle optimisation PDP control (optional) ### Compressor synchronisation### Low noise levels during purge and blow-off Pressure dewpoint control ### High-quality, high-efficient desiccant, selected for the right application PDP -20°C\/-3°F &• PDP -40°C\/-40°F: activated alumina PDP -70°C\/-94°F: molecular sieves ### Spring-loaded desiccant, minimizing the risk of crushing ### Counter-current regeneration for optimal energy efficiency and guaranteed dry air ### Designed for transportability & mountability Wall-mounting kit for PH 55-190 HE (optional) ### Optimal control and monitoring thanks to the PurelogicTM controller (optional) ### Desiccant bags for easy service from the top ## Options", "product_order": "0", "product_icon": "\/media\/commerce_products\/320\/PH700-2950HE-heatless-adsorption-dryer-POP.jpg", "product_brand_id": "1", "product_price": "0.0000", "product_price_ex_tax": 0, "product_price_local_tax": "0.0000", "product_created_datetime": "2020-02-14 09:50:48", "product_code": "PH 700 - 2950 HE", "product_barcode": null, "product_is_unorderable": "0", "product_is_shipping_required": "1", "product_inventory_level": null, "product_uri": "\/products\/air-compressors\/air-treatment-and-nitrogen\/air-dryers\/desiccant-dryers\/ph-700-2950-he\/" }, { "product_id": "319", "product_title": "Pneumatech PH 90 - 690 HE Extruded Profile Heatless Adsorption Dryers", "product_content": "## Pneumatech PH 90 - 690 HE Extruded Profile Heatless Adsorption Dryers Incorporating high-quality components, PH heatless adsorption dryers provide you with clean, dry air to extend the life of your equipment and products. Heatless adsorption dryers use dry, expanded purge air to remove moisture from the desiccant material. PH 90-690 HE adsorption dryers are available in 3 PDP variants: -20°C\/-4°F , -40C°\/-40°F, each optimized to provide the lowest purge loss. The unique manifold (patent pending) includes pilot air controlled 3\/2-way valves, which switch fast and reliably. The pressure drop over the valves is reduced to a minimum. This does not only result in a low pressure drop over the dryer, but also ensures maximum purge air expansion during regeneration. The latter makes that the purge consumption of the dryers has been reduced significantly. The desiccant is spring-loaded and housed in a robust extruded aluminum body, which can operate up to 14 barg\/203 psig (fatigue load). The dryers are equipped with a mounted pre-filter and after-filter as standard and can also be wall-mounted with a specially designed wall-mounting kit (optional). Operating costs are optimized at all times thanks to the availability of compressor synchronization and purge nozzle optimization as standard and PDP control as option. The full machine status can be checked on the display of the controller and the vessel pressure gauges on the unit. The controller indicates whether power supply is connected, towers are pressurized, valves are functioning properly or preventive maintenance needs to be done. In case the optional PDP control is connected, the PDP value can monitored from the display. Alarms and warnings can also be triggered remote with the available voltage-free contacts. Optionally the PurelogicTM can be used as central brain of the adsorption dryer ## Features and benefits: • Structured desiccant offers highly effcient air flow and regeneration• Stable low pressure dew point• 40% longer desiccant lifetime• Easy desiccant maintenance• No desiccant dust that can cause dryer failures and compromise production• Pneumatic valves add robustness in demanding environments• Vertical or horizontal installation• Purge nozzle optimization• PDP control (optional for DC1 controller)• Wall-mounting kit (optional for Simplex models)## General Specifications • Heatless adsorption dryers: extruded profile design• Dew points achievable: -20°C\/-5°F, -40°C\/-40°F• Pressure range: 4-14 barg\/58-203 psig• Ambient temperature range: 2-45°C\/36-113°F• Inlet temperature range : 2-60°C\/ 36-140°F• Power supply: 230VAC 50\/60Hz & 115VAC 50\/60Hz## What makes PH blower purge desiccant dryers unique? Purelogic™ advanced control with remote start\/stop and web monitoring standard on all modelsQuality butterfly and check valves with SST discsLow kW centrifugal blower with safety alarmTower switching based on real-time dew pointGalvanized piping with flanged connections ## Control and Monitor Your Dryer The Purelogic™ is the ideal complement to your desiccant dryer. This state-of-the-art control solution will provide optimal control and monitoring of your machines, increased reliability and reduced energy use. Purelogic™ is standard on PE and PB dryers, and is optional on the PH range.• Easy to use – Purelogic™ incorporates a 3.5” high-definition color display with a multilingual user interface, clear icon indications and Ethernet connectivity.• Control & monitoring – Purelogic™ displays & controls all parameters to ensure reliable operation of your desiccant dryer.• Reliable – Heatless backup mode (PE\/PB) and choice for auto restart after power failure.• Safeguards production – Offers a number of alarms that gives the customer the information needed for safe operations", "product_order": "0", "product_icon": "\/media\/commerce_products\/319\/PH230-635HE-heatless-adsorption-dryer-POP.jpg", "product_brand_id": "1", "product_price": "0.0000", "product_price_ex_tax": 0, "product_price_local_tax": "0.0000", "product_created_datetime": "2020-02-14 09:50:46", "product_code": "PH 90 - 690 HE", "product_barcode": "", "product_is_unorderable": "0", "product_is_shipping_required": "1", "product_inventory_level": null, "product_uri": "\/products\/pneumatech-ph-90-690-he-extruded-profile-heatless-adsorption-dryers\/" }, { "product_id": "317", "product_title": "Pneumatech PB 760 - 3390 S Heated Purge Adsorption Dryers | 1296-5760 m3\/hr", "product_content": "## Pneumatech PB 760-3390 S Heated Purge Adsorption Dryers | 1296-5760 m3\/hr PB Zero Purge dryers have the absolute lowest lifecycle costs, by eliminating purge losses during regeneration and cooling.PB dryers are for customers who focus on energy efficiency and low lifecycle costs, while maintaining the highest standards in air purity. PB dryers use heated blower purge air to remove moisture from the desiccant material and have therefore no purge loss during regeneration. The Zero Purge variants reduce life cycle cost even further by also eliminating purge loss during cooling. PB 210-635 HE adsorption dryers are capable ofdrying air to a PDP of -40°C\/-40°F as standard and -70°C\/-94°F as option for purge units.The desiccant is housed in welded vessels, which are coated and can operate up to 14.5 barg\/ 210 psig (fatigue load). All dryers are standard equipped with 2 coalescing prefilters before and 1 particulate filter after the dryer. Operating costs are reduced to the absolute minimum thanks to PDP control, regeneration & cooling temperature control and compressor synchronization; which are all integrated in the Purelogic™ controller. Zero Purge variants are equipped with a purge back-up mode which switches the dryer to purge cooling mode in case PDP could not be met at ambient conditions outside of limitations. The Purelogic™ also ensures maximum reliability by monitoring the most important parameters of the dryer and offers impressive control and monitoring capabilities.## What makes PB blower purge desiccant dryers unique? Purelogic™ advanced control with remote start\/stop and web monitoring standard on all modelsQuality butterfly and check valves with SST discsLow kW centrifugal blower with safety alarmTower switching based on real-time dew pointGalvanized piping with flanged connections ## Control and Monitor Your Dryer The Purelogic™ is the ideal complement to your desiccant dryer. This state-of-the-art control solution will provide optimal control and monitoring of your machines, increased reliability and reduced energy use. Purelogic™ is standard on PE and PB dryers, and is optional on the PH range.• Easy to use – Purelogic™ incorporates a 3.5” high-definition color display with a multilingual user interface, clear icon indications and Ethernet connectivity.• Control & monitoring – Purelogic™ displays & controls all parameters to ensure reliable operation of your desiccant dryer.• Reliable – Heatless backup mode (PE\/PB) and choice for auto restart after power failure.• Safeguards production – Offers a number of alarms that gives the customer the information needed for safe operations # Features ##### Feature 1 Advanced energy management for lowest operating costs##### Feature 2 Compressor synchronisation##### Feature 3 Pressure dewpoint control##### Feature 4 Regeneration & cooling temperature control##### Feature 5 Optional purge nozzle optimization##### Feature 6 High-quality, high-efficient desiccant, selected for the right application##### Feature 7 Minimal risk of crushed desiccant thanks to the sonic nozzle and the large vessel diameters##### Feature 8 Counter-current regeneration for optimal energy efficiency and guaranteed dry air##### Feature 9 High efficient heaters, designed for maximum lifetime and minimal risk##### Feature 10 Compact, efficient and reliable side-channel centrifugal blower##### Feature 11 Designed for transportability## Options", "product_order": "0", "product_icon": "\/media\/commerce_products\/317\/PH700-2950HE-heatless-adsorption-dryer-POP.jpg", "product_brand_id": "1", "product_price": "0.0000", "product_price_ex_tax": 0, "product_price_local_tax": "0.0000", "product_created_datetime": "2020-02-14 09:50:44", "product_code": "PE 760-3390", "product_barcode": null, "product_is_unorderable": "0", "product_is_shipping_required": "1", "product_inventory_level": null, "product_uri": "\/products\/air-compressors\/air-treatment-and-nitrogen\/air-dryers\/desiccant-dryers\/pb-760-3390\/" }, { "product_id": "316", "product_title": "Pneumatech PB 700-6350 HE Blower Purge \/ Zero Purge Adsorption Dryers | 1188-10800 m3\/hr", "product_content": "## Pneumatech PB 700-6350 HE Blower Purge \/ Zero Purge Adsorption Dryers | 1188-10800 m3\/hr PB dryers are for customers who focus on energy efficiency and low lifecycle costs, while maintaining the highest standards in air purity. PB blower purge dryers use heated blower purge air to remove moisture from the desiccant material and have therefore no purge loss during regeneration. PB Zero Purge dryers have the absolute lowest lifecycle costs, by eliminating purge losses during regeneration and cooling.PB dryers are for customers who focus on energy efficiency and low lifecycle costs, while maintaining the highest standards in air purity. PB dryers use heated blower purge air to remove moisture from the desiccant material and have therefore no purge loss during regeneration. The Zero Purge variants reduce life cycle cost even further by also eliminating purge loss during cooling. PB 210-635 HE adsorption dryers are capable ofdrying air to a PDP of -40°C\/-40°F as standard and -70°C\/-94°F as option for purge units.The desiccant is housed in welded vessels, which are coated and can operate up to 14.5 barg\/ 210 psig (fatigue load). All dryers are standard equipped with 2 coalescing prefilters before and 1 particulate filter after the dryer. Operating costs are reduced to the absolute minimum thanks to PDP control, regeneration & cooling temperature control and compressor synchronization; which are all integrated in the Purelogic™ controller. Zero Purge variants are equipped with a purge back-up mode which switches the dryer to purge cooling mode in case PDP could not be met at ambient conditions outside of limitations. The Purelogic™ also ensures maximum reliability by monitoring the most important parameters of the dryer and offers impressive control and monitoring capabilities.## What makes PB blower purge desiccant dryers unique? Purelogic™ advanced control with remote start\/stop and web monitoring standard on all modelsQuality butterfly and check valves with SST discsLow kW centrifugal blower with safety alarmTower switching based on real-time dew pointGalvanized piping with flanged connections ## Control and Monitor Your Dryer The Purelogic™ is the ideal complement to your desiccant dryer. This state-of-the-art control solution will provide optimal control and monitoring of your machines, increased reliability and reduced energy use. Purelogic™ is standard on PE and PB dryers, and is optional on the PH range.• Easy to use – Purelogic™ incorporates a 3.5” high-definition color display with a multilingual user interface, clear icon indications and Ethernet connectivity.• Control & monitoring – Purelogic™ displays & controls all parameters to ensure reliable operation of your desiccant dryer.• Reliable – Heatless backup mode (PE\/PB) and choice for auto restart after power failure.• Safeguards production – Offers a number of alarms that gives the customer the information needed for safe operations # Features ##### Feature 1 Advanced energy management for lowest operating costs##### Feature 2 Compressor synchronisation##### Feature 3 Pressure dewpoint control##### Feature 4 Regeneration & cooling temperature control##### Feature 5 Optional purge nozzle optimization##### Feature 6 High-quality, high-efficient desiccant, selected for the right application##### Feature 7 Minimal risk of crushed desiccant thanks to the sonic nozzle and the large vessel diameters##### Feature 8 Counter-current regeneration for optimal energy efficiency and guaranteed dry air##### Feature 9 High efficient heaters, designed for maximum lifetime and minimal risk##### Feature 10 Compact, efficient and reliable side-channel centrifugal blower##### Feature 11 Designed for transportability## Options", "product_order": "0", "product_icon": "\/media\/commerce_products\/316\/Pneumatech-blower-purge-zero-purge-adsorbtion-dryers-PB700-6350-POP.jpg", "product_brand_id": "1", "product_price": "0.0000", "product_price_ex_tax": 0, "product_price_local_tax": "0.0000", "product_created_datetime": "2020-02-14 09:50:42", "product_code": "PB 700-6350 HE", "product_barcode": null, "product_is_unorderable": "0", "product_is_shipping_required": "1", "product_inventory_level": null, "product_uri": "\/products\/air-compressors\/air-treatment-and-nitrogen\/air-dryers\/desiccant-dryers\/pb-700-6350-he\/" }, { "product_id": "315", "product_title": "Pneumatech PB 210 - 635 HE Blower Purge \/ Zero Purge Adsorption Dryers | 360-1080 m3\/hr", "product_content": "## Pneumatech PB 210-635 HE Blower Purge \/ Zero Purge Adsorption Dryers (360-1080 m3\/hr) PB dryers are for customers who focus on energy efficiency and low lifecycle costs, while maintaining the highest standards in air purity. PB blower purge dryers use heated blower purge air to remove moisture from the desiccant material and have therefore no purge loss during regeneration. PB Zero Purge dryers have the absolute lowest lifecycle costs, by eliminating purge losses during regeneration and cooling.PB dryers are for customers who focus on energy efficiency and low lifecycle costs, while maintaining the highest standards in air purity. PB dryers use heated blower purge air to remove moisture from the desiccant material and have therefore no purge loss during regeneration. The Zero Purge variants reduce life cycle cost even further by also eliminating purge loss during cooling. PB 210-635 HE adsorption dryers are capable ofdrying air to a PDP of -40°C\/-40°F as standard and -70°C\/-94°F as option for purge units.The desiccant is housed in welded vessels, which are coated and can operate up to 14.5 barg\/ 210 psig (fatigue load). All dryers are standard equipped with 2 coalescing prefilters before and 1 particulate filter after the dryer. Operating costs are reduced to the absolute minimum thanks to PDP control, regeneration & cooling temperature control and compressor synchronization; which are all integrated in the Purelogic™ controller. Zero Purge variants are equipped with a purge back-up mode which switches the dryer to purge cooling mode in case PDP could not be met at ambient conditions outside of limitations. The Purelogic™ also ensures maximum reliability by monitoring the most important parameters of the dryer and offers impressive control and monitoring capabilities.## What makes PB blower purge desiccant dryers unique? Purelogic™ advanced control with remote start\/stop and web monitoring standard on all modelsQuality butterfly and check valves with SST discsLow kW centrifugal blower with safety alarmTower switching based on real-time dew pointGalvanized piping with flanged connections ## Control and Monitor Your Dryer The Purelogic™ is the ideal complement to your desiccant dryer. This state-of-the-art control solution will provide optimal control and monitoring of your machines, increased reliability and reduced energy use. Purelogic™ is standard on PE and PB dryers, and is optional on the PH range.• Easy to use – Purelogic™ incorporates a 3.5” high-definition color display with a multilingual user interface, clear icon indications and Ethernet connectivity.• Control & monitoring – Purelogic™ displays & controls all parameters to ensure reliable operation of your desiccant dryer.• Reliable – Heatless backup mode (PE\/PB) and choice for auto restart after power failure.• Safeguards production – Offers a number of alarms that gives the customer the information needed for safe operations # Features ##### Feature 1 Advanced energy management for lowest operating costs##### Feature 2 Compressor synchronisation##### Feature 3 Pressure dewpoint control##### Feature 4 Regeneration & cooling temperature control##### Feature 5 Optional purge nozzle optimization##### Feature 6 High-quality, high-efficient desiccant, selected for the right application##### Feature 7 Minimal risk of crushed desiccant thanks to the sonic nozzle and the large vessel diameters##### Feature 8 Counter-current regeneration for optimal energy efficiency and guaranteed dry air##### Feature 9 High efficient heaters, designed for maximum lifetime and minimal risk##### Feature 10 Compact, efficient and reliable side-channel centrifugal blower##### Feature 11 Designed for transportability##### Feature 12 High-quality, high-efficient desiccant, selected for the right application## Options", "product_order": "0", "product_icon": "\/media\/commerce_products\/315\/Pneumatech-blower-purge-zero-purge-adsorbtion-dryers-PB210-635-POP.jpg", "product_brand_id": "1", "product_price": "0.0000", "product_price_ex_tax": 0, "product_price_local_tax": "0.0000", "product_created_datetime": "2020-02-14 09:50:41", "product_code": "PB 210 - 635HE", "product_barcode": null, "product_is_unorderable": "0", "product_is_shipping_required": "1", "product_inventory_level": null, "product_uri": "\/products\/air-compressors\/air-treatment-and-nitrogen\/air-dryers\/desiccant-dryers\/pb-210-635he\/" }, { "product_id": "187", "product_title": "CP7763 3\/4\" Super Duty Impact Wrench, Max Torque 1,630 Nm", "product_content": "# The Chicago Pneumatic CP7763 is a powerful 3\/4\" impact wrench with Ring retainer. It's ideal for general workshop and maintenance applications.The CP7763 provides maximum operator comfort and control attributable to great engineering and ergonomics even at high torque levels. With a powerful motor and durable clutch, the CP7763 is ideal for oil, gas & petrochemical, or mining requirements, as well as general maintenance applications. The tool exhibits the comfortable use thanks to low noise and vibration levels. It features with good durability. This air tool is compact and has a durable clutch. It has high power: 1,200 ft. lbs (1,627 Nm). This air tool has combined power regulator with forward\/reverse function. The CP7763 impact wrench is ideal for general maintenance applications, and it built for operator comfort. It features a 3\/4\" impact wrench with Ring retainer.## Key Benefits POWERFUL Max torque in reverse: 1,630 Nm ROBUST Powerful motor & Combined power regulator with forward\/reverse DURABLE Twin hammer clutch", "product_order": "0", "product_icon": "\/media\/commerce_products\/187\/AshAir-CP7763-Air-Impact-Wrench_1.jpg", "product_brand_id": "2", "product_price": "1090.5100", "product_price_ex_tax": 948.26956521739, "product_price_local_tax": "1090.5100", "product_created_datetime": "2020-02-14 09:48:23", "product_code": "8941077630 *THIS PRODUCT IS AVAILABLE ONLINE ONLY*", "product_barcode": null, "product_is_unorderable": "0", "product_is_shipping_required": "1", "product_inventory_level": "1", "product_uri": "\/products\/cp-tools-cp7763-3-4-super-duty-impact-wrench-max-torque-1630-nm-8941077630-this-product-is-available-online-only\/" }, { "product_id": "183", "product_title": "CP7737 1\/2\" Angle Impact Wrench, Max Torque 300 Nm", "product_content": "# The CP7737 1\/2\" models provide 300 Nm of maximum torque in reverse. Measuring just 88 mm in length, the CP7737 compact angle impact wrenches allow easier access to areas where maneuverability with a standard tool would be difficult. Everything about this tool is compact and lighter. You can achieve more with this tool! This air tool has easy operation with single handed Forward-Reverse operation and 3 positions in forwards and 1 in reverse. It's jumbo hammer mechanism is highly durable, with a steel motor, composite cover and direct drive transmission mechanism. ## Key Benefits COMPACT & LIGHTWEIGHT only 1.3 Kg and 88 mm long POWERFUL Max torque in reverse: 300 Nm DURABLE Steel motor with Direct drive transmission mechanism GOOD DESIGN Aluminum housing and composite cover EASY TO USE Single handed Forward ? Reverse operation", "product_order": "0", "product_icon": "\/media\/commerce_products\/183\/AshAir-CP7737-Angle-Impact-Wrench.jpg", "product_brand_id": "2", "product_price": "575.0000", "product_price_ex_tax": 500, "product_price_local_tax": "575.0000", "product_created_datetime": "2020-02-14 09:48:17", "product_code": "8941077370 *THIS PRODUCT IS AVAILABLE ONLINE ONLY*", "product_barcode": null, "product_is_unorderable": "0", "product_is_shipping_required": "1", "product_inventory_level": "0", "product_uri": "\/products\/cp-tools-cp7737-1-2-angle-impact-wrench-max-torque-300-nm-8941077370-this-product-is-available-online-only\/" }, { "product_id": "182", "product_title": "CP7732C 1\/2\" Ultra Compact Impact Wrench, Max Torque 625 Nm", "product_content": "The CP7732C delivers maximum value with an unbeatable power-to-weight ratio, weighing just 1 kg and 108 mm in length while still providing a maximum torque of 625 Nm in reverse. It's the perfect impact wrench for use inside the vehicle and engine compartment for jobs on oil pans, seat bolts and body panels. Its jumbo hammer mechanism, steel motor and aluminum clutch housing provide excellent performance and withstand the tough workshop environment. 1 Hand operation behind the trigger 2 positions in reverse; max and lower torque 2 position in forward: max and low torque. This stubby impact wrench is perfect for very restricted areas such as transmission, engine, and interior work.## Key Benefits COMPACT & LIGHTWEIGHT only 1.0 Kg and 108 mm long POWERFUL Max torque in reverse: 625 Nm DURABLE Steel motor with aluminium clutch housing GOOD LOOK & FEEL Composite housing with curved handle EASY TO USE \"Side-to-Side\" one handed Forward-Reverse operation", "product_order": "0", "product_icon": "\/media\/commerce_products\/182\/AshAir-CP7732C-3D-left.jpg", "product_brand_id": "2", "product_price": "440.7400", "product_price_ex_tax": 383.25217391304, "product_price_local_tax": "440.7400", "product_created_datetime": "2020-02-14 09:48:16", "product_code": "8941077321 *THIS PRODUCT IS AVAILABLE ONLINE ONLY*", "product_barcode": "", "product_is_unorderable": "0", "product_is_shipping_required": "1", "product_inventory_level": "0", "product_uri": "\/products\/chicago-pneumatic-cp7732c-1-2-ultra-compact-impact-wrench-max-torque-625-nm\/" }, { "product_id": "136", "product_title": "Chicago Pneumatic CPVSd 40 Oil Injected Screw Compressor with Variable Speed Drive (VSD)", "product_content": "## Advanced VSD direct drive in a perfect all-in-one solution Cleverly built by joining together gearbox technology and Variable Speed Drive innovation, the CPVSd 40 and CPVSd 50 are perfect for applications that demand high energy efficiency, rebustness, and reliability. Up to 35% of energy consumption can be saved through a combination of advanced elements, compared to a fixed speed machine of the same size. This series is a brilliant choice for modern engineering and manufacturing facilities. Equipped with ES4000 ADVANCED controllers, the machine operates to its maximum efficiency when you have a full control of your compressed air system. Apart from being installed as a stand-alone unit by itself, the CPVSd 40 and CPVSd 50 can also be networked to another fixed speed (load-unload) compressor acting as a regulator for the whole site, increasing the total efficiency to the next level. ### Benefits of Variable Speed Drive High energy efficiency with an intelligent inverter and sensors Smooth start - no peak current penalties on mechanical parts at start-ups (prolong components' life) Reduced system pressure = Reduced energy consumption Reduced system pressure = Minimised air leakages Complete with 270L receiver and dryer Highly efficient C55 Star Air-end VSD + Direct drive - High energy efficiency Low costs of ownership Quiet: 70 dB(A) ES4000 ADVANCED graphic controller ## Key benefits Highly efficient element ensures low energy consumption and long term performance Highly efficient belt transmission reducing energy consumption Direct driven transmission for further energy saving (CPVSd) Protects your air network against rust and corrosion thanks to integrated solutions (dryer, air filter,... Inverter technology perfectly matching the air flow with the air demand saving energy costs up to 30% User-friendly controller for full control ## Features ### Cost energy reduction and sustainability Up to 35% of energy savings and an average cut of 25% in the compressor lifecycle cost thanks to IE3 motors or Variable Speed technology, combined with the direct driven transmission design. Optimal efficiency, lubrication and cooling and long service intervals ### Customisable with wide range of options This rotary screw compressor range is available in Variable Speed direct –driven and Fixed speed gear driven versions. Customable options include energy recovery to reduce energy bill and canopy heaters for low temperature installation ### Simple installation Compact and all-in-one system, thanks to the oversized integrated dryers. No special foundation needed ### Built to last Designed for continuous duty and very hard working conditions.### ES-4000 Unique control units, specially programmed for Energy Saving. ### Easy access for servicing All service components are located at the front of the machine for top accessibility. ## VSD Energy Savings ## ## Energy Efficiency Variable Speed Drive (VSD) compressors can save up to 35% of system energy costs. More than 80% of a compressor’s lifecycle cost comes from the consumption of energy. Therefore we focus on reducing your energy bill by adapting your compressors’ output with the demanded air input.#### How it works Operations have a fluctuating demand for air, so our VSD technology for compressors makes sure that you and your business get the required air at the required time. This makes sure that your compressor is not using more energy than needed, effectively decreasing your energy consumption, and increasing your energy efficiency. More than 80% of a compressor’s lifecycle cost comes from the consumption of energy. Therefore we focus on reducing your energy bill  by adapting your compressors’ output with the demanded air input. On average we save your company 35% of the energy cost usually related to compressor costs. This gives you a competitive advantage. ## ## Energy Recovery The energy recovery option can capture heat and recover up to 75% of energy loss.When looking at the typical carbon footprint of an air compressor - from the design phase right through to the equipment’s recycling - the energy consumed in its use accounts for 99% of CO2 emissions. As energy consumption also typically represents over 80% of a compressor’s lifecycle cost, energy savings in compressed air systems will have a significant impact towards preserving not only the environment but also your bottom line. While compressed air systems in general account for about 10% of total industrial electricity consumption, this can amount to as much as 40% of the electricity bill for certain plants.#### How does compressor heat recovery work? Up to 94% of the electrical energy is converted into compression heat. Without energy recovery, this heat is lost into the atmosphere via the cooling system and radiation. You can use hot water recovered from the compressed air system for sanitary purposes and space heating. But it is particularly suitable for process applications. Using the hot water as boiler pre-feed or directly in processes requiring 70 to 90°C can save you costly energy sources such as natural gas and heating oil.", "product_order": "0", "product_icon": "\/media\/commerce_products\/136\/AshAir-CPVSd-35-40-50-Dryer-left.jpg", "product_brand_id": "1", "product_price": "0.0000", "product_price_ex_tax": 0, "product_price_local_tax": "0.0000", "product_created_datetime": "2020-02-14 09:47:28", "product_code": "4152017496", "product_barcode": null, "product_is_unorderable": "0", "product_is_shipping_required": "1", "product_inventory_level": null, "product_uri": "\/products\/chicago-pneumatic-rotary-screw-air-compressor-variable-speed-drive-below-50hp-cpvsd-40\/" }, { "product_id": "134", "product_title": "Chicago Pneumatic CPVSd 29 Oil Injected Screw Compressor with Variable Speed Drive (VSD)", "product_content": "## Advanced VSD direct drive in a perfect all-in-one solution Cleverly built by joining together gearbox technology and Variable Speed Drive innovation, the CPVSd 29 is excellent in efficiency and reliability. The motor speed is adjusted to match your air demand, resulting in up to 35% energy saving compared to a fixed speed machine of the same size. The CPVSd 29 is ideal for fluctuating air demand, a brilliant choice for engineering and manufacturing industries. Equipped with ES4000 ADVANCED controllers, the CPVSd 29 operates to its maximum efficiency when you have a full control of your compressed air system. Apart from being installed as a stand-alone unit by itself, the CPVSd 29 can also be networked to your existing fixed speed (load-unload) compressor acting as a regulator for the whole site, increasing the total efficiency to the next level. ### Benefits of Variable Speed Drive High energy efficiency with an intelligent inverter and sensors Smooth start - no peak current penalties on mechanical parts at start-ups (prolong components' life) Reduced system pressure = Reduced energy consumption Reduced system pressure = Minimised air leakages Complete with 270L receiver and dryer Highly efficient C55 Star Air-end VSD + Direct drive - High energy efficiency Low costs of ownership Quiet: 71 dB(A ES4000 ADVANCED graphic controller ## Key benefits Highly efficient element ensures low energy consumption and long term performance Highly efficient belt transmission reducing energy consumption Direct driven transmission for further energy saving (CPVSd) Protects your air network against rust and corrosion thanks to integrated solutions (dryer, air filter,... Inverter technology perfectly matching the air flow with the air demand saving energy costs up to 30% User-friendly controller for full control ## Features ### Cost energy reduction and sustainability Up to 35% of energy savings and an average cut of 25% in the compressor lifecycle cost thanks to IE3 motors or Variable Speed technology, combined with the direct driven transmission design. Optimal efficiency, lubrication and cooling and long service intervals ### Customisable with wide range of options This rotary screw compressor range is available in Variable Speed direct –driven and Fixed speed gear driven versions. Customable options include energy recovery to reduce energy bill and canopy heaters for low temperature installation ### Simple installation Compact and all-in-one system, thanks to the oversized integrated dryers. No special foundation needed ### Built to last Designed for continuous duty and very hard working conditions.### ES-4000 Unique control units, specially programmed for Energy Saving. ### Easy access for servicing All service components are located at the front of the machine for top accessibility. ## VSD Energy Savings ## ## Energy Efficiency Variable Speed Drive (VSD) compressors can save up to 35% of system energy costs. More than 80% of a compressor’s lifecycle cost comes from the consumption of energy. Therefore we focus on reducing your energy bill by adapting your compressors’ output with the demanded air input.#### How it works Operations have a fluctuating demand for air, so our VSD technology for compressors makes sure that you and your business get the required air at the required time. This makes sure that your compressor is not using more energy than needed, effectively decreasing your energy consumption, and increasing your energy efficiency. More than 80% of a compressor’s lifecycle cost comes from the consumption of energy. Therefore we focus on reducing your energy bill  by adapting your compressors’ output with the demanded air input. On average we save your company 35% of the energy cost usually related to compressor costs. This gives you a competitive advantage. ## ## Energy Recovery The energy recovery option can capture heat and recover up to 75% of energy loss.When looking at the typical carbon footprint of an air compressor - from the design phase right through to the equipment’s recycling - the energy consumed in its use accounts for 99% of CO2 emissions. As energy consumption also typically represents over 80% of a compressor’s lifecycle cost, energy savings in compressed air systems will have a significant impact towards preserving not only the environment but also your bottom line. While compressed air systems in general account for about 10% of total industrial electricity consumption, this can amount to as much as 40% of the electricity bill for certain plants.#### How does compressor heat recovery work? Up to 94% of the electrical energy is converted into compression heat. Without energy recovery, this heat is lost into the atmosphere via the cooling system and radiation. You can use hot water recovered from the compressed air system for sanitary purposes and space heating. But it is particularly suitable for process applications. Using the hot water as boiler pre-feed or directly in processes requiring 70 to 90°C can save you costly energy sources such as natural gas and heating oil.", "product_order": "0", "product_icon": "\/media\/commerce_products\/134\/CP_C67_Direct_tank_mounted_dryer_3quarter_right.jpg", "product_brand_id": "1", "product_price": "0.0000", "product_price_ex_tax": 0, "product_price_local_tax": "0.0000", "product_created_datetime": "2020-02-14 09:47:25", "product_code": "4152032742", "product_barcode": null, "product_is_unorderable": "0", "product_is_shipping_required": "1", "product_inventory_level": null, "product_uri": "\/products\/chicago-pneumatic-rotary-screw-air-compressor-variable-speed-drive-below-50hp-cpvsd-29\/" }, { "product_id": "133", "product_title": "Chicago Pneumatic CPVSd 21 Oil Injected VSD Driven Screw Compressor with 500 L Receiver + Dryer", "product_content": "## Advanced VSD direct drive in a perfect all-in-one solution CPVSd 21 is a super smart all-in-one solution that supports your business growth. Combining an intelligent Variable Speed Drive (VSD) with an advanced direct driven transmission together with a high-frequency motor, the CPVSd 21 is the most recommended compressed air solution for future-proof businesses. Up to 35% of energy saving can be achieved by this clever combination. High-quality elements are also used in making the CPVSd 20 a perfect compressor for you. ### Benefits of Variable Speed Drive High energy efficiency with an intelligent inverter and sensors Smooth start - no peak current penalties on mechanical parts at start-ups (prolong components' life) Reduced system pressure = Reduced energy consumption Reduced system pressure = Minimised air leakages Complete with 270L receiver and dryer Highly efficient C55 Star Air-end VSD + Direct drive - High energy efficiency Low costs of ownership Quiet: 65 dB(A) ES4000 ADVANCED graphic controller ## Key benefits Highly efficient element ensures low energy consumption and long term performance Highly efficient belt transmission reducing energy consumption Direct driven transmission for further energy saving (CPVSd) Protects your air network against rust and corrosion thanks to integrated solutions (dryer, air filter,... Inverter technology perfectly matching the air flow with the air demand saving energy costs up to 30% User-friendly controller for full control ## Features ### Cost energy reduction and sustainability Up to 35% of energy savings and an average cut of 25% in the compressor lifecycle cost thanks to IE3 motors or Variable Speed technology, combined with the direct driven transmission design. Optimal efficiency, lubrication and cooling and long service intervals ### Customisable with wide range of options This rotary screw compressor range is available in Variable Speed direct –driven and Fixed speed gear driven versions. Customable options include energy recovery to reduce energy bill and canopy heaters for low temperature installation ### Simple installation Compact and all-in-one system, thanks to the oversized integrated dryers. No special foundation needed ### Built to last Designed for continuous duty and very hard working conditions.### ES-4000 Unique control units, specially programmed for Energy Saving. ### Easy access for servicing All service components are located at the front of the machine for top accessibility. ## VSD Energy Savings ## ## Energy Efficiency Variable Speed Drive (VSD) compressors can save up to 35% of system energy costs. More than 80% of a compressor’s lifecycle cost comes from the consumption of energy. Therefore we focus on reducing your energy bill by adapting your compressors’ output with the demanded air input.#### How it works Operations have a fluctuating demand for air, so our VSD technology for compressors makes sure that you and your business get the required air at the required time. This makes sure that your compressor is not using more energy than needed, effectively decreasing your energy consumption, and increasing your energy efficiency. More than 80% of a compressor’s lifecycle cost comes from the consumption of energy. Therefore we focus on reducing your energy bill  by adapting your compressors’ output with the demanded air input. On average we save your company 35% of the energy cost usually related to compressor costs. This gives you a competitive advantage. ## ## Energy Recovery The energy recovery option can capture heat and recover up to 75% of energy loss.When looking at the typical carbon footprint of an air compressor - from the design phase right through to the equipment’s recycling - the energy consumed in its use accounts for 99% of CO2 emissions. As energy consumption also typically represents over 80% of a compressor’s lifecycle cost, energy savings in compressed air systems will have a significant impact towards preserving not only the environment but also your bottom line. While compressed air systems in general account for about 10% of total industrial electricity consumption, this can amount to as much as 40% of the electricity bill for certain plants.#### How does compressor heat recovery work? Up to 94% of the electrical energy is converted into compression heat. Without energy recovery, this heat is lost into the atmosphere via the cooling system and radiation. You can use hot water recovered from the compressed air system for sanitary purposes and space heating. But it is particularly suitable for process applications. Using the hot water as boiler pre-feed or directly in processes requiring 70 to 90°C can save you costly energy sources such as natural gas and heating oil.", "product_order": "0", "product_icon": "\/media\/commerce_products\/133\/AshAir-CPVSd-270L-500L-receiver-dryer.jpg", "product_brand_id": "1", "product_price": "0.0000", "product_price_ex_tax": 0, "product_price_local_tax": "0.0000", "product_created_datetime": "2020-02-14 09:47:23", "product_code": "4152032740", "product_barcode": null, "product_is_unorderable": "0", "product_is_shipping_required": "1", "product_inventory_level": null, "product_uri": "\/products\/chicago-pneumatic-rotary-screw-air-compressor-variable-speed-drive-below-50hp-cpvsd-21\/" }, { "product_id": "131", "product_title": "Chicago Pneumatic CPVSd 15 Oil Injected VSD Driven Screw Compressor with 270 L Receiver + Dryer", "product_content": "## Advanced VSD direct drive in a perfect all-in-one solution CPVSd 15 is a super smart all-in-one solution that supports your business growth. Combining an intelligent Variable Speed Drive (VSD) with an advanced direct driven transmission together with a high-frequency motor, the CPVSd 15 is the most recommended compressed air solution for future-proof businesses. Up to 35% of energy saving can be achieved by this clever combination. High-quality elements are also used in making the CPVSd 15 a perfect compressor for you. ### Benefits of Variable Speed Drive High energy efficiency with an intelligent inverter and sensors Smooth start - no peak current penalties on mechanical parts at start-ups (prolong components' life) Reduced system pressure = Reduced energy consumption Reduced system pressure = Minimised air leakages Complete with 270L receiver and dryer Highly efficient C55 Star Air-end VSD + Direct drive - High energy efficiency Low costs of ownership Quiet: 65 dB(A) ES4000 ADVANCED graphic controller ## Key benefits Highly efficient element ensures low energy consumption and long term performance Highly efficient belt transmission reducing energy consumption Direct driven transmission for further energy saving (CPVSd) Protects your air network against rust and corrosion thanks to integrated solutions (dryer, air filter,... Inverter technology perfectly matching the air flow with the air demand saving energy costs up to 30% User-friendly controller for full control ## Features ### Cost energy reduction and sustainability Up to 35% of energy savings and an average cut of 25% in the compressor lifecycle cost thanks to IE3 motors or Variable Speed technology, combined with the direct driven transmission design. Optimal efficiency, lubrication and cooling and long service intervals ### Customisable with wide range of options This rotary screw compressor range is available in Variable Speed direct –driven and Fixed speed gear driven versions. Customable options include energy recovery to reduce energy bill and canopy heaters for low temperature installation ### Simple installation Compact and all-in-one system, thanks to the oversized integrated dryers. No special foundation needed ### Built to last Designed for continuous duty and very hard working conditions.### ES-4000 Unique control units, specially programmed for Energy Saving. ### Easy access for servicing All service components are located at the front of the machine for top accessibility. ## VSD Energy Savings ## ## Energy Efficiency Variable Speed Drive (VSD) compressors can save up to 35% of system energy costs. More than 80% of a compressor’s lifecycle cost comes from the consumption of energy. Therefore we focus on reducing your energy bill by adapting your compressors’ output with the demanded air input.#### How it works Operations have a fluctuating demand for air, so our VSD technology for compressors makes sure that you and your business get the required air at the required time. This makes sure that your compressor is not using more energy than needed, effectively decreasing your energy consumption, and increasing your energy efficiency. More than 80% of a compressor’s lifecycle cost comes from the consumption of energy. Therefore we focus on reducing your energy bill  by adapting your compressors’ output with the demanded air input. On average we save your company 35% of the energy cost usually related to compressor costs. This gives you a competitive advantage. ## ## Energy Recovery The energy recovery option can capture heat and recover up to 75% of energy loss.When looking at the typical carbon footprint of an air compressor - from the design phase right through to the equipment’s recycling - the energy consumed in its use accounts for 99% of CO2 emissions. As energy consumption also typically represents over 80% of a compressor’s lifecycle cost, energy savings in compressed air systems will have a significant impact towards preserving not only the environment but also your bottom line. While compressed air systems in general account for about 10% of total industrial electricity consumption, this can amount to as much as 40% of the electricity bill for certain plants.#### How does compressor heat recovery work? Up to 94% of the electrical energy is converted into compression heat. Without energy recovery, this heat is lost into the atmosphere via the cooling system and radiation. You can use hot water recovered from the compressed air system for sanitary purposes and space heating. But it is particularly suitable for process applications. Using the hot water as boiler pre-feed or directly in processes requiring 70 to 90°C can save you costly energy sources such as natural gas and heating oil.", "product_order": "0", "product_icon": "\/media\/commerce_products\/131\/AshAir-CPVSd-270L-500L-receiver-dryer.jpg", "product_brand_id": "1", "product_price": "0.0000", "product_price_ex_tax": 0, "product_price_local_tax": "0.0000", "product_created_datetime": "2020-02-14 09:47:19", "product_code": "4152018556", "product_barcode": null, "product_is_unorderable": "0", "product_is_shipping_required": "1", "product_inventory_level": null, "product_uri": "\/products\/chicago-pneumatic-rotary-screw-air-compressor-variable-speed-drive-below-50hp-cpvsd-15\/" }, { "product_id": "119", "product_title": "Chicago Pneumatic CPA 10 Oil Injected Screw Compressor with 270L Receiver + Dryer (8 bar version)", "product_content": "## An excellent all-in-one solution This series of screw compressors is for tough and hard working conditions, designed with user-friendliness, reliability and durability in mind. When selecting from our extensive offer of oil-injected screw compressors, you choose reliable performance, proven technology and increased efficiency. These ranges are suitable for more demanding applications and can be deployed in harsh working conditions. These units are compact, economical to service and quiet, and suitable to install in or close to your workshop (e.g. service garage or small assembly line). #### The CPA Series can be configured as an ultimate all-in-one solution that includes: Refrigerant dryer Automatic drain Air receiver 270 or 500L Line filter ##### Configure the ultimate all-in-one solution Forget about complex and costly installations with the ability to include ##### A wide choice of variants An air receiver (270 or 500 L) A refrigerant dryer An automatic drain An Inline filter ## Key Benefits Long lasting belts and reliable belt tensioning system for excellent performance Good positioning of service items for easy servicing Save space and installation costs with tank-mounted installations with dryer In-house designed air end suitable for continuous duty and very hard working conditions Increased operating comfort through reduced noise levels ### Designed for small spaces With a compact design and small footprint, it compresses, stores and processes air using just 1,5 m2. Choose a tank mounted solution to save even more space. ### Silent operation The compressor can be placed near offices as its insulation foam, deflectors and anti-vibration pads assure low noise levels.### Easy to install and maintain The good positioning of service items, belts, oil and filters allows for quick maintenance and the oil level can be checked from the outside. ### Built to last These compressors are designed for continuous duty and very hard working conditions.### Advanced control and monitoring All running and control functions are managed by the ES3000 or ES4000 electronic controller, resulting in high energy savings and efficient system monitoring.", "product_order": "3", "product_icon": "\/media\/commerce_products\/119\/CPA_15_270_tank.jpg", "product_brand_id": "1", "product_price": "0.0000", "product_price_ex_tax": 0, "product_price_local_tax": "0.0000", "product_created_datetime": "2020-02-14 09:47:04", "product_code": "CPA 10", "product_barcode": "", "product_is_unorderable": "0", "product_is_shipping_required": "1", "product_inventory_level": null, "product_uri": "\/products\/chicago-pneumatic-rotary-screw-compressor-fixed-speed-below-50hp-cpa-10-oil-injected\/" }, { "product_id": "120", "product_title": "Chicago Pneumatic CPA 15 Oil Injected Screw Compressor with 270L Receiver + Dryer (8 bar version)", "product_content": "## An excellent all-in-one solution This series of screw compressors is for tough and hard working conditions, designed with user-friendliness, reliability and durability in mind. When selecting from our extensive offer of oil-injected screw compressors, you choose reliable performance, proven technology and increased efficiency. These ranges are suitable for more demanding applications and can be deployed in harsh working conditions. These units are compact, economical to service and quiet, and suitable to install in or close to your workshop (e.g. service garage or small assembly line). #### The CPA Series can be configured as an ultimate all-in-one solution that includes: Refrigerant dryer Automatic drain Air receiver 270 or 500L Line filter ##### Configure the ultimate all-in-one solution Forget about complex and costly installations with the ability to include ##### A wide choice of variants An air receiver (270 or 500 L) A refrigerant dryer An automatic drain An Inline filter ## Key Benefits Long lasting belts and reliable belt tensioning system for excellent performance Good positioning of service items for easy servicing Save space and installation costs with tank-mounted installations with dryer In-house designed air end suitable for continuous duty and very hard working conditions Increased operating comfort through reduced noise levels ### Designed for small spaces With a compact design and small footprint, it compresses, stores and processes air using just 1,5 m2. Choose a tank mounted solution to save even more space. ### Silent operation The compressor can be placed near offices as its insulation foam, deflectors and anti-vibration pads assure low noise levels.### Easy to install and maintain The good positioning of service items, belts, oil and filters allows for quick maintenance and the oil level can be checked from the outside. ### Built to last These compressors are designed for continuous duty and very hard working conditions.### Advanced control and monitoring All running and control functions are managed by the ES3000 or ES4000 electronic controller, resulting in high energy savings and efficient system monitoring.", "product_order": "4", "product_icon": "\/media\/commerce_products\/120\/CPA_15_270_tank.jpg", "product_brand_id": "1", "product_price": "0.0000", "product_price_ex_tax": 0, "product_price_local_tax": "0.0000", "product_created_datetime": "2020-02-14 00:00:00", "product_code": "4152025085", "product_barcode": "", "product_is_unorderable": "0", "product_is_shipping_required": "1", "product_inventory_level": null, "product_uri": "\/products\/chicago-pneumatic-rotary-screw-compressor-fixed-speed-below-50hp-cpa-15-oil-injected\/" }, { "product_id": "313", "product_title": "Pneumatech Nitrogen Generator PPNG 6-68 S (up to 99.999% purity; up to 148 m3\/h)", "product_content": "Switch from Liquid Nitrogen to On-Site Generation and Cut Your Operating Cost Down! Leasing a Nitrogen Generator on-site from Ash Air is a risk-free way for you to cover your Nitrogen needs (up to 99.999% purity, up to 148 m3\/h flow) The On-Site Nitrogen Generation package will includes compressor, filtration, receivers, PPNG Nitrogen Generator and piping system. Leasing an Nitrogen Generator on-site is a risk free alternative to liquid nitrogen: all you need is to provide electricity and space. If you opt for a lease, you incur no capital expenditure; you simply switch from MANPAK to your own Nitrogen lease fee. The fee is fixed for 5 years, thus nitrogen costs will remain as your operating expenses. We will do remote monitoring and preventative maintenance to ensure the highest up-time. The PPNG series is Pneumatech’s premium on-site nitrogen solution for low to high flows, with best-in-class performance and the most complete scope of supply.The generator has outstanding air factors at full load thanks to the use of highly efficient Carbon Molecular Sieves (CMS) and back-flow pressurization.The air consumption is also optimized at reduced nitrogen flow or pressure demands, thanks to the advanced energy saving algorithm, which automatically adjusts the cycle times of the generator.The control and monitoring capabilities of the PPNG series are truly impressive. Purity is guaranteed at all times by opening the consumer valve only at the requested purity level and flushing nitrogen when purity is not reached. Feed air quality is controlled by monitoring the critical parameters i.e Temperature, Pressure and Dew Point. CMS is prone to the damages when exposed to water and oil. All risks of possible CMS damages due to high humidity and higher velocities are eliminated thanks to the inlet dew point control and Automatic start up feature of PPNG HE. ## Benefits of On-Site Nitrogen Generation: Less cost per m3\/min No hidden cost such as MANPAK rent and transport NO cost of evaporated nor remaining nitrogen in bottles Operating cost only (lease or lease-to-own solutions) PPNG Nitrogen Generators use Pressure Swing Adsorption technology to extract nitrogen molecules from the compressed air; and can reach purities from 95% up to 99,999%. Nitrogen pressures can go up to 12 bar(g) without the need for an additional booster. The air factors of the PPNG6-68s range are outstanding, making the return on investment very attractive compared to traditional gas supply. Boosters are also available for higher pressure. Compact installation: Pressure vessels, valves, exhaust system, sensors and controls are all integrated within a compact canopy. The PurelogicTM is the central brain of the nitrogen generator. It optimises operating costs thanks to the availability of the energy saving control; ensures maximum reliability by keeping track of the most important parameters of the generator; and offers impressive control and monitoring capabilities. The optional flow meter and inlet pressure dew point sensor can be added to the scope of supply to further exploit the monitoring capabilities of the PurelogicTM controller. ## What makes the PPNG generator unique? Purelogic™ controller for full communication and monitoring possibilitiesProduced in-house with unique design features Plug and play: no specialist needed for installation A zirconia oxygen sensor with a long lifetime, compared to electrochemical cells that need replacement every year Silencer for reduced noise level when purging Flow meter as standard on all PPNG generators Nitrogen purities from 97%-99.999% # Features #### Advanced energy saving control Reduced air consumption at low nitrogen demand Also compensates for altering ambient conditions and purity settings No compressed air use when no nitrogen is consumed Optimal control and monitoring thanks to PurelogicTM Controller Self-protective monitoring of the feed air quality Feed-air blow-off in case of contamination Nitrogen flow, purity and pressure measured and controlled Automatic start-up #### High-quality, high-efficient Carbon Molecular Sieves selected for the right application #### Guaranteed purity Automatically regulates to the requested nitrogen pressure andpurity Zirconia sensors for reliable purity measurement #### Designed & tested for cyclic load #### Outstanding air factors thanks to back-flow pressurization # Technical Data # Applications ## Pneumatech PPNG Nitrogen Generator Launch", "product_order": "0", "product_icon": "\/media\/commerce_products\/313\/AshAir-PPNG-6-68S-PSA-Nitrogen-Generator-left-1.jpg", "product_brand_id": "1", "product_price": "0.0000", "product_price_ex_tax": 0, "product_price_local_tax": "0.0000", "product_created_datetime": "2020-02-14 00:00:00", "product_code": "8102319194", "product_barcode": "", "product_is_unorderable": "0", "product_is_shipping_required": "1", "product_inventory_level": null, "product_uri": "\/products\/air-compressors\/air-treatment-and-nitrogen\/nitrogen-generators\/ppng-6-68-s\/" } ]